SmCo Disc Magnets
14 TYPES AVAILABLE
£4.02 per pack
SmCo Discs with Central Holes
6 TYPES AVAILABLE
£5.42 per pack
SmCo Rectangular Magnets
10 TYPES AVAILABLE
£4.02 per pack
Precision SmCo Magnets
0 TYPES AVAILABLE
£POA per pack
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5 (SmCo 1:5) and this has a maximum energy product of between 14 and 24 MGOe. The second, and more common, form is Sm2Co17 (SmCo 2:17) and this has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm) and 60% Cobalt (Co) with the balance being from varying amounts of Iron (Fe), Copper (Cu), Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. We offer 29 grades of sintered SmCo and 7 main grades of bonded SmCo. SmCo26 (a 2:17 variety) is the most commonly used grade.
Samarium Cobalt is also known as SmCo, Rare Earth Cobalt, RE Cobalt, RECo and CoSm.
Samarium Cobalt (SmCo) magnets are not as strong as the Neodymium (NdFeB) magnets (maximum energy product of between 30 and 50 MGOe) but they have three significant advantages. The SmCo magnets work over a wider temperature range, have superior temperature coefficients and have much greater corrosion resistance.
Samarium Cobalt (SmCo) magnets can be used over a massive temperature range. A few Neodymium magnet grades can be used at temperatures up to 220 degrees C. The SmCo magnets start to outperform the NdFeB magnets around 150-180 degrees C. Also, Samarium Cobalt magnets are ideal for very low temperature applications (SmCo can be used down to a few Kelvin above Absolute Zero) making them a first choice magnet for cryogenic applications. They can also be used in very high temperatures - up to +250 deg C or +300/+350 degrees C depending on the grade; the SmCo26 is rated to +300 degreec C)
The flux output of the Samarium Cobalt (SmCo) magnets is more stable with changes in temperature than NdFeB magnets due to having better temperature coefficients (e.g. -0.030%/°C for change in Br versus -0.100%/°C for NdFeB and -0.20%/°C for change in Hci versus -0.60%/°C for NdFeB). This can be particularly useful in critical applications such as sensors (although Alnico can be a better choice for temperature stability). It also means that Samarium Cobalt can resist demagnetisation better than Neodymium in higher temperature applications such as motors.
Samarium Cobalt (SmCo) magnets contain less free iron than Neodymium magnets and therefore provide better corrosion resistance than Neodymium magnets. It is very rare for SmCo magnets to require protective plating (a notable exception is the use of nickel plating for soldering the magnets to printed circuit boards). Sm1Co5 contains no iron so has excellent corrosion resistance. Sm2Co17 has some free iron that may corrode on the magnet surface when exposed directly to water. Sm2Co17 is still, for most applications (other than marineenvironments) regarded as having good to very good corrosion resistance (in marine applications the magnet can be given a simple low cost protective coating such as NiCuNi to prevent any corrosion possibilities) and the corrosion resistance is still far superior compared to NdFeB.
These characteristics therefore make Samarium Cobalt (SmCo) suitable for applications such as pump couplings, sensors, loudspeakers, generators, guitar pick-ups, motors, sump plugs, high temperature applications, wide temperature range applications and for use in corrosive (e.g. water, oil) environments, marine applications, automotive, aerospace and military applications.
We offer bespoke sintered SmCo magnets. Standard magnet tolerances are +/-0.1mm with +/-0.05mm available for slightly higher cost. We can also produce the SmCo magnets with tolerances down towards +/-0.005mm as part of our Precision Magnets range although we will specify the tolerances that can be achieved for each shape (the Precision Magnets range is limited to small sized magnets and also to 100k minimum order quantity).
We supply Samarium Cobalt (SmCo) magnets with Maximum Energy Products (BHmax) varying from 18 MGOe up to 32 MGOe (our standard is 26 MGOe which we call SmCo26). In addition, we offer a range of SmCo with increased Hci to standard SmCo. We also supply Low Temperature Coefficient SmCo22LTC and SmCo10LTC(1:5) which has smaller variations in magnetic output with temperature than standard SmCo.
Bonded and Plastic bonded Samarium Cobalt is also available. Tooling charges may apply for these products (these products are made to order only and are best suited for higher volume production runs).
Please contact us for a datasheet on our sintered and bonded Samarium Cobalt (SmCo) magnets.