Universal Magnetic Sweeper

An Introduction to Universal Magnetic Sweeper

The Universal Magnetic Sweeper is the main Magnetic Sweeper Unit used in the Industrial Hand Held and Towable Magnetic Sweeper systems. It is supplied without any handles for towing or hand-pulling. The handles and the optional collection bucket are offered as accessories. This allows the user to buy the accessories separately or make their own attachments to suit their own requirements.

The Universal Magnetic Sweeper has 150mm diameter solid elastic rubber wheels at the ends, has threaded bars on the top to allow connection to the handle accessories or any other bespoke connection system. It also has brackets with eyebolts for connecting onto the tines of a fork lift truck or connection via rope or chain onto other vehicles or gantry cranes, etc.

The Universal Magnetic Sweeper is approximately 1.44m across and the active base is approximately 44mm above the surface to be swept (the actual height may vary from front to back depending on the height of the tow bar). This sweep height can be raised or lowered by around 20mm upon request. It exists in two standard forms. The F2 version is two magnets deep and is suitable for all general use. The F3 version is three magnets deep (50% more magnet material) and is used for maximum performance.

If a special sized Universal Magnetic Sweeper is required (e.g. taller for more magnetic performance or wider for a bigger sweep area per drive past), please ask us to provide a quotation.

How to buy Universal Magnetic Sweeper

Buy Universal Magnetic Sweeper

Part No.	Size	Grade	Pull (kg)
MAGSWEEP48U2	48 inches long, 2 magnets deep, with wheels, reflective tape and reflectors, but no handles	Ferrite magnet	Depends on sweep height
MAGSWEEP48U3	48 inches long, 3 magnets deep, with wheels, reflective tape and reflectors, but no handles	Ferrite magnet	Depends on sweep height

Buy Universal Magnetic Sweeper