click to reduce image
click to enlarge image
A deep pot magnet offers high holding forces on parts that are thick and clean with a good surface finish.
To make a jig or fixture magnetic, simply drill a flat bottomed hole and a central fixing hole, push the deep pot magnet into it and secure tightly from underneath with a cap screw.
The magnets magnetic face can now be ground flush with the surface of the fixture.
|Part No.||Size||Grade||Pull (kg)|
|MAG829||9.5mm dia x 15mm - M3 tapped hole||Alnico 5||1kg|
|MAG830||12.7mm dia x 16mm - M3 tapped hole||Alnico 5||2kg|
|MAG831||17.5mm dia x 16mm - M6 tapped hole||Alnico 5||2.5kg|
|MAG832||20.5mm dia x 19mm - M6 tapped hole||Alnico 5||4kg|
|MAG833||27mm dia x 25mm - M6 tapped hole||Alnico 5||6kg|
|MAG834||35mm dia x 30mm - M6 tapped hole||Alnico 5||14kg|