ORDER UP TO 4.00PM
for next day delivery

FREE SHIPPING ON
orders over £50

VOLUME DISCOUNTS
Online

ORDER UP TO 4.00PM
for next day delivery

FREE SHIPPING ON
orders over £50

VOLUME DISCOUNTS
Online

Neo magnets

FF Drawer Magnets

Shopping With Us

Why use Bunting - eMagnets?

  • Order by 4:00pm for Next Day Delivery
  • Lines Open from 8:00am to 5:00pm
  • 5 Star Trustpilot Rating
  • World Class Technical Support
  • Volume Pricing Available On Line
  • Live chat
  • Millions of Magnets available from Stock
Clear

FF Drawer Magnets

£332.54£724.29

Clear
SKU: N/A Category:
Part #ABCPackage QuantityPriceQuantity
DR-1600-DS LP-1600-PLS6x6 InchSlide Undrilled Flanges1 £332.54
DR-2100-D FF4600-PLS6x6 InchSlide Undrilled Flanges1 £506.65
DR-3500-D FF4800-PLS8x8 InchSlide Undrilled Flanges1 £724.29

Description

Buy FF Drawer Magnets online with Bunting – eMagnets™

Bunting Magnetics FF Drawer Magnets remove ferrous contamination from dry free flowing products flowing by gravity. Bunting Magnetics Drawer Magnets are fitted with super strong Neodymium Rare Earth magnets that capture and hold ferrous metal particles which can be so small that you may not be able to see them with the naked eye.

Unlike competing Rare Earth Drawer Magnets that can permanently lose their magnetic fields at temperatures above 175 degrees F, Bunting Magnetic’s exclusive FF Drawer Magnet design is the only temperature-compensated Rare Earth Drawer Magnet made for injection moulding machines. The FF Drawer Magnet is guaranteed not to lose its permanent magnetic strength when bolted to feed throats operating at temperatures of 175 degrees F (80 degrees C).

The highly refined Bunting Magnetics FF Drawer Magnets are the only temperature-compensated Rare Earth magnets available for injection molding machines. The Bunting Magnetics FF Drawer Magnets products are guaranteed not to lose its magnetic strength when bolted to feed throats operating at temperatures in excess of 175 degrees F. This means guaranteed durability and less downtime for you. You also get reduced screw wear and fewer plugged nozzles.

Bunting Magnetics FF Drawer Magnets have been the Plastics Industry’s most popular choice for extrusion, injection and blow moulding equipment for the past 40 years becoming an industry standard.

The Neodymium magnets have exceptional surface holding force for more complete removal of contaminants and less chance of “wipe-off”.

The standard Bunting Magnetics FF Drawer Magnet units tend to have two trays of drawer magnets inside each unit, although you can have between 1 and 5 trays. So you can request anything from 1 through to 5 trays in your unit.

As well as the models on the website we also offer self-cleaning and continuously self-cleaning versions, so production is not stopped.

For applications where the temperature is safely below 175 degrees F, the Bunting Magnetics HF Drawer Magnets could be used instead.

If you are looking to upgrade your existing drawer magnet, make sure you avoid potential equipment damage! Upgrade with the best…Bunting Magnetics.

Additional information

Weight N/A
A

FF4600-PLS, FF4800-PLS, LP-1600-PLS

B

6×6 Inch, 8×8 Inch

C

Slide Undrilled Flanges

Package Quantity

1

Description

Buy FF Drawer Magnets online with Bunting – eMagnets™

Bunting Magnetics FF Drawer Magnets remove ferrous contamination from dry free flowing products flowing by gravity. Bunting Magnetics Drawer Magnets are fitted with super strong Neodymium Rare Earth magnets that capture and hold ferrous metal particles which can be so small that you may not be able to see them with the naked eye.

Unlike competing Rare Earth Drawer Magnets that can permanently lose their magnetic fields at temperatures above 175 degrees F, Bunting Magnetic’s exclusive FF Drawer Magnet design is the only temperature-compensated Rare Earth Drawer Magnet made for injection moulding machines. The FF Drawer Magnet is guaranteed not to lose its permanent magnetic strength when bolted to feed throats operating at temperatures of 175 degrees F (80 degrees C).

The highly refined Bunting Magnetics FF Drawer Magnets are the only temperature-compensated Rare Earth magnets available for injection molding machines. The Bunting Magnetics FF Drawer Magnets products are guaranteed not to lose its magnetic strength when bolted to feed throats operating at temperatures in excess of 175 degrees F. This means guaranteed durability and less downtime for you. You also get reduced screw wear and fewer plugged nozzles.

Bunting Magnetics FF Drawer Magnets have been the Plastics Industry’s most popular choice for extrusion, injection and blow moulding equipment for the past 40 years becoming an industry standard.

The Neodymium magnets have exceptional surface holding force for more complete removal of contaminants and less chance of “wipe-off”.

The standard Bunting Magnetics FF Drawer Magnet units tend to have two trays of drawer magnets inside each unit, although you can have between 1 and 5 trays. So you can request anything from 1 through to 5 trays in your unit.

As well as the models on the website we also offer self-cleaning and continuously self-cleaning versions, so production is not stopped.

For applications where the temperature is safely below 175 degrees F, the Bunting Magnetics HF Drawer Magnets could be used instead.

If you are looking to upgrade your existing drawer magnet, make sure you avoid potential equipment damage! Upgrade with the best…Bunting Magnetics.

Additional information

Weight N/A
A

FF4600-PLS, FF4800-PLS, LP-1600-PLS

B

6×6 Inch, 8×8 Inch

C

Slide Undrilled Flanges

Package Quantity

1